DMH The Advanced SNMPv3 Agent now supports IPv6 transport addresses and IPv6 network addresses table entries.
The support for IPv6 network addresses allows the DMH Advanced SNMP Agent to be integrated and used in IPv6 and IPv4 platforms. The Agent can be used with IPv6 Protocol Stack, IPv4 Protocol Stack and dual Protocol Stacks (both IPv4 and IPv6 are used on the same platform).
The Transport API as well as internal Software Interfaces support a generic Transport Address representation. Specifically, both IPv6 and IPv4 addresses can be used. Other Transport addresses are supported as well.
The SNMPv3 uses the SNMP-TARGET-MIB to identify the management targets to which notifications should be sent. The DMH SNMP Agent API and internal software representation changed to support IPv6 transport domain and destination network address.
We successfully tested the IPv6 support with IPv6 Protocol Stack.
Learn more about the DMH SNMPv3 SNMP Agent here.
DMH Advanced SNMPv3 Agent now supports The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model as defined and specified by rfc3826
The support for AES encryption is offered as a full Source-Code SDK upgrade or a full binary SDK upgrade. The DMH Advanced SNMPv3 Agent is designed to be used in any given platform: small to large embedded system as well as general purpose platforms. It is specifically designed for small embedded platforms.
We successfully tested the AES support with industry leading SNMP Management applications.
Learn more about the DMH SNMPv3 SNMP Agent here.
DMH Advanced Java SNMP Agent is now available. It is finally here: a cross-platform real-time Java SNMP Agent for Embedded Systems. DMH Advanced Java Snmp-Agent is designed to be used in any given Java capable platform. It is specifically designed for small embedded Java platforms.
We successfully tested the new Embedded Java SNMP-Agent on a very small, real-time, embedded platform: the Dallas TINI Java platform. We are getting very nice results both in size and response time from the Java snmp-agent running under tini "slush". The response time is almost as good as the response time of the tini "C" agent.
Learn more about the DMH Java SNMP Agent here.
DMH Advanced SNMP Agent for the Netburner platform is now available with the support for Netburner Ipstack MIB-II.
The following Ipstack MIB-II are supported:
| IP-MIB | IP scalars including counters, Address table and ARP table |
| IP-FORWARD-MIB | IP Forwarding table. (CIDR table) |
| TCP-MIB | TCP scalars, some counters, TCP Connection table |
| UDP-MIB | UDP listen table and UDP counters |
| IF-MIB | Interface table, scalars including Ethernet interface counter |
See more information about the DMH SNMP Agent on NetBurner platform below.
DMH Advanced SNMP Agent SDK is now available for the NetBurner Platform. All snmp versions are supported: SNMPv1, SNMPv2c and SNMPv3.
DMH SNMP Agent is fully integrated with the NetBurner platform C/C++ software. The Agent for NetBurner platform is available in Source Code SDK form or as a Binary SDK.
The NetBurner platform is a Coldfire based system consists of firmware, software and tools to develop network devices, including: hardware, RTOS, TCP/IP Stack, Web Server, the ANSII GNU C/C++ Compiler, the GUI GDB debugger, IDE, and deployment tools.
See more information about the platform here: NetBurner, and NetBurner products. We used the GNU 32bit C/C++ compiler for the Coldfire 32bit CPU to build the snmp-agent for the NetBurner platform, along with the software provided by NetBurner C Library and Software tools.
We thoroughly tested the snmp-agent on NetBurner SB72-512 platform. All snmp versions: SNMPv1, SNMPv2c and SNMPv3 were fully tested and passed all regression tests.
The compiler and software development tools are provided with the platform. See more information about development software here: NetBurner Software , GCC tool set for Coldfire , and NetBurner ipstack
DMH Advanced SNMP Agent for the Dallas DS80C400 TINI® platform is now available with support for TINI Ipstack MIB-II.
The following Ipstack MIB-II are supported:
| IP-MIB | IP scalars (not counters), Address table and ARP table |
| IP-FORWARD-MIB | IP Forwarding table. (CIDR in future) |
| TCP-MIB | TCP scalars, some counters, TCP Connection table |
| UDP-MIB | UDP listen table (not counters) |
| IF-MIB | Interface table, some scalars (not counter) |
The Dallas DS80C400 TINI® platform consists of a hardware and software real-time tcp/ip stack for networking applications. The platform consists of software APIs to the network stack. See more information about TINI platform at: TINI - Tiny InterNet Interfaces. The "C" library project information can be found at: Dallas DS80C400 C Library Project.
The DMH SNMP Agent has been integrated with Dallas DS80C400 TINI® ANSI C environment and thoroughly tested on this platform. It is deployed and used for various applications.
The snmp-agent for the TINI platform is available in source code form or as a binary SDK.
We built and tested the SNMP Agent code by the popular Keil "C51" compiler for DS80C400 8051 platform. See more information at: Keil Software
DMH Advanced SNMP Agent for the Datalight Sockets platform is now available with a full support for SOCKETS Ipstack MIB-II.
The following Ipstack MIB-II are supported:
| IP-MIB | IP counters and other scalars ICMP counters, ARP table |
| IP-FORWARD-MIB | CIDR table |
| TCP-MIB | TCP counters and other scalars, TCP Connection table |
| UDP-MIB | UDP counters, UDP Listen table |
| IF-MIB | Interface counters, Interface table. |
Datalight-Sockets is a real-time tcp/ip software platform for DOS based systems (16 bit and 32 bit). See more information at: Datalight Sockets.
The DMH SNMP Agent has been integrated with Datalight-Sockets and tested on DOS SOCKET platforms. The snmp-agent on Datalight-Sockets is widely deployed and used for many applications such as NTCIP, UTMC, UPS, as well as other proprietary applications.
We built and tested the SNMP Agent and mib-ii using the Borland BCC compiler for x86 16 bit platforms.
DMH Advanced SNMP Agent is now available for systems with CMX-MicroNet(tm) tcp/ip. See news about 8051 below. CMX-MicroNet is a real-time tcp/ip software platform for small systems (e.g. 8051). See more information here: CMX Systems. We used the Keil C51 8bit "C" compiler to build the snmp-agent and CMX-MicroNet for Cygnal C8051F124 Board.
DMH Advanced SNMP Agent is now available for Dallas DS80C400 TINI® Platform. See news about 8051 below. The TINI® platform is a micro-controller based development system. It is a combination of broad based I/O, and a full TCP/IP stack. See more information here: TINI platform, and TINI spec. We used the popular Keil C51 8bit "C" compiler to build the snmp-agent software for the TINI Platform, and the TINI C Library API.
DMH Advanced SNMP Agent is now available for 8bit CPU based systems such as 8051. We have not compromised features or protocol completeness. A set of compile-time flags allow you to reduce the code and data size to meet memory restrictions. You can use the popular Keil C51 8bit "C" compiler to build the snmp-agent software.
See information about Latest Releases and platform here
All releases of DMH SNMP Agent are NOT vulnerable to CERT
vulnerability. See more information: CERT
Advisory: Impact on DMH SNMP Agent products.